|| Home | Free Articles for Your Site | Submit an Article | Advertise | Link to Us | Search | Contact Us ||
OTHER ITA SITES:
8 Energy Saving Tips For Your Clothes Washer
Everyone likes to save money. Since your household appliances are some of the largest electricity consumers, this is a good place to start your savings quest. The following is a collection of tips about how to save electricity when using your electrical clothes washing machine.
1 Sort clothes.
By sorting into the proper groupings the water temperature required becomes automatic. There will be no guesswork involved. For instance, by washing all dark clothes together the normal hot water wash temperature can be lowered to warm.
2 Place near water source.
Place the washing machine near the hot water tank. Substantial amounts of heat can be lost as the hot water travels between the tank and washing machine. If the distance between them is greater than ten feet insulation should be added to hot water pipe.
3 Outside walls.
If the hot water pipe is attached to an outside wall the heat will be radiated out through the wall. Pipes should not attach directly to outside walls. Can be corrected by adding wooden spacers between the wall and pipes to insulate from each other.
4 Water level.
For small loads lower the water level accordingly. But, donít lower water below half full even for very small loads. Too little water can result in clothes tangling and being damaged.
5 Donít overload.
Overloaded washing machines will consume more electricity as the motor strains to move the excess clothing. It also leads to problems associated with poor removal of the lint from the machine. Persons who overload waste energy because clothes often have to be rewashed.
6 Auto Fill.
If your washer has an auto fill feature consider its use. The machine will automatically fill to the proper level. It compensates for load size and will use less water. Auto temperature will mix the cold and hot water as it enters the machine.
7 Clean filter.
For those machines will an accessible water filter, clean them after every second load. Proper water flow will lower time required to obtain a clean wash. If excess lint builds up in the filter it can re-deposit back into the clothes. This will require the clothes to be rewashed.
8 Level machine.
Any washer that consistently goes out of balance is wasting energy. Restarting the washing machine is usually accompanied by it being refilled by the homeowner. This wastes both water and electrical energy. An out of balance load may leave the clothes damp at the end of the cycle. This is energy inefficient because the clothes will have to by spun again. Also, excess water left in clothes will lead to wasting energy becasue the clothes will require extra time in the clothes dryer.
The above are some of the most common suggestions associated with energy savings. When striving for energy efficiency during clothes washing always be aware of anything that interupts, lengthens, slows, or disturbs the natural cycle of the machine. Any of them can cause unnecessary electricity being consumed.
Auto and Trucks
Business and Finance
Computers and Internet
Food and Drink
Gadgets and Gizmos
Kids and Teens
Music and Movies
Pets and Animals
Politics and Government
Recreation and Sports
Religion and Faith
Travel and Leisure