|| Home | Free Articles for Your Site | Submit an Article | Advertise | Link to Us | Search | Contact Us ||
OTHER ITA SITES:
Automobile Brakes: Slowing Your Way to Safety
Just imagine speeding down the highway. Just imagine the sun on your face and the wind on your hair. Just imagine the feeling of being one with your car and the road as well. Feels great, doesn’t it? This time, imagine trying to slow down your descent however finding out that your Rover brakes do not work. Now that would be a great misfortune.
An automobile’s brake system has been continually refined and redefined for over a century. Automobiles without brakes would not a great thing for drivers and passengers would be very much prone to accidents, collisions, and crashes. The modern automotive brakes system has now become extremely independent, dependable, indispensable, and very efficient. All these are due to the experiences of drivers and innovations of automobile experts.
The Rover brake system of an automobile generally consists of disk brakes. They are mounted and installed in the front and rear ends of the automobile. The disk brakes, or also known as drum brakes, installed in the rear is connected by a system of tubes and hoses. These then link the Rover brake at each wheel and connect them to the master cylinder. If a person looks more closely into an automobile’s brake system, he would be able to discover that there are other systems that are connected to this system. These other systems include the parking brakes, the power brake booster, and the anti-lock system.
If a person steps on the Rover brake pedal what actually happens is that he is actually pushing against the plunger found in the master cylinder. By doing such action, it forces the hydraulic oil or brake fluid to go through a series of tubes and hoses to the braking unit at each wheel. The concept behind this is that hydraulic fluid, or any other kind of fluid, cannot be compressed. By pushing the fluid through the pipe, this produces the same action and reaction of like pushing a steel bar through a pipe.
However, the main difference between the hydraulic fluid and a steel bar is that the hydraulic fluid has the capacity to be directed through many twists and turns on its way to its destination while a steel bar has no capacity to do so. Upon going through its own maze, it arrives back to its original location and state so that it could be used once again. What is essential, though, is to keep the liquid free from air bubbles. If there are air bubbles in the liquid this actually slows down and reduces the vehicle’s braking system’s efficiency. If this actually happens, the entire braking system must undergo a bleeding where the air can be removed. Each wheel cylinder and caliper has “bleeder screws” that facilitate the release of any air in the fluid.
With all the attention to details that the http://www.landrparts.com company gives to the vehicles that they manufacture, it is only fitting that Land Rover Parts and Range Rover Parts offers top of the line brakes and brake system parts that will match Land Rover and Range Rover brake performance. Land Rover Parts and Range Rover Parts’ online store has everything covered when it comes to brakes and parts of the brake system.
Auto and Trucks
Business and Finance
Computers and Internet
Food and Drink
Gadgets and Gizmos
Kids and Teens
Music and Movies
Pets and Animals
Politics and Government
Recreation and Sports
Religion and Faith
Travel and Leisure